The wires are labelled and colour matched with Link XLOOM. So when reading forums the Link staff my reference a wire colour or operation that will sync with this terminated mini harness.
 
The reason for this mini harness is to have a Deutsch connector after the ECU which allows you to add mini harnesses to the other side of the Deutsch connector as you add PnP features to your engine, such as DBW (drive by wire) throttle body & pedal, wastegate solenoid, MAP sensor, Fuel pressure sensor etc...
 
We have MANY PnP (plug n Play) products with mini harnesses coming for the SupraLink ECU.
 
The SupraLink ECU has two expansion Looms. Please choose which one/s you want. Both are recommended.
 
Expansion Loom 1 has:
-pin 1 (Green) GND
-pin 2 (RED) +5V
-pin3 (Grey) Volt7
-pin4 (Brown) Volt6
-pin5 (White) Temp4
-pin6 (Blue) Temp3
-pin7 (Yellow) DI8
-pin8 (Orange) DI7
 
Expansion Loom 2 has;
-pin 1 (Green) GND
-pin 2 (RED) +5V
-pin3 (Grey) AUX9
-pin4 (Brown) DI9
-pin5 (White) DI10
-pin6 (Blue) Volt8
-pin7 (Yellow) Volt9
-pin8 (Orange) Volt10