NEW DESIGN 2023!
THIS KIT NOW FITS BOTH STOCK GE and GTE VALVE COVERS!!!!!
The stock GTE plastic engine cover will also fit as stock on top.
This coil on plug kit allows you to REMOVE the GE distributor and upgrade your ignition system to take nearly unlimited power levels without spark blowing out under high boost levels. This kit will also complete the Dual CAM/CRANK sensor kit to run your GE engine as a GTE while using your stock wiring harness.
KIT INCLUDES:
-Lightweight aluminum bracket with posts.
-bolts to attach bracket.
-six YARIS STICK COILS, brand new (copy) generic coils.
-Plug & Play wiring harness for stock GTE ECU and all Plug n Play aftermarket/stand-alone ECU's, or open ended FLYING Harness for custom harness wire in jobs. Made from TEFZEL & TXL 18AWG high temp motorsport wire.
NOTE: THIS MUST BE RUN WITH A FORWARD-FACING INTAKE MANIFOLD. It won't fit under the GE intake. Please see my GE to GTE intake plenum adapter to bring your engine into the modern era.
2JZ-GE YARIS COIL ON PLUG KIT (NON VVTi only)
1.) Remove the for center bolts from your valve covers.
2.) place new Bracket and stands onto the head.
3.) screw down allen head bolts.
4.) insert coils onto spark plugs and fit bell nuts.
5.) clip in coil connectors and run the harness across the fire wall.
6.) bolt GROUND TERMINAL TO THE BACK OF THE HEAD.
7.) Plug in the 5 pin connector to your stock GE harness where the stock igniter was fitted. This is on the left hand strut tower. (JDM passenger side/USDM driver side.
8.) feed the six IGT (ignition trigger wires) through the rubber boot on the fire wall and into the passenger footwell. Push the pins into the back of the stock GE ECU connector plug. ALL PINS ARE CLEARLY LABELLED. A diagram will be sent with the kit.
CONTRATULATIONS, YOU NOW HAVE SEQUENTIAL IGNITION.
THROW YOUR DISTRIBUTOR INTO A FIRE!! (sorry, I couldn't resist). only joking.
